 |
 |
 |
 |
 |
 |
 |
 |
 |
VendingMiser
Products
Let MEGAwatt and VendingMiser® put you on a cost-effective refresher course for energy savings and conservation. No need to purchase new machines to reduce operating costs and greenhouse gas emissions.When equipped with the VendingMiser®, refrigerated beverage vending machines use less energy.
VendingMiser® cuts energy costs down to size.
VendingMiser® incorporates innovative energy-saving technology into a small plug-and-play device that installs in minutes, either on the wall or on the vending machine.
VendingMiser® brings you...
·A quick, inexpensive solution for immediate energy savings and conservation
Longer machine lifespan
·Early ROI less than a two year payback
·Environmental benefits reduces GHG emissions by 2,615 lbs of CO2
·Compatibility with all types of cold drink vending machines
VendingMiser® uses a Passive Infrared Sensor to:
Power down the machine when the surrounding area is vacant
Monitor the room's temperature
Automatically repower the cooling system at one to three hour intervals, independent of sales
Ensure the product stays cold
This Miser runs the bank...
For a series of up to four machines, VendingMiser® can use its embedded Sensor Repeater, which allows it to be controlled from the PIR sensor of any other Miser in the bank.
Miserly savings...
Maintenance savings is generated through reduced running time of vendor components, estimated at $40 - $80 per year, per machine. Energy consumption is reduced an average of 46% - typically $130 to $190 per machine annual
VendingMiser® cuts energy costs down to size.
VendingMiser® incorporates innovative energy-saving technology into a small plug-and-play device that installs in minutes, either on the wall or on the vending machine.
VendingMiser® brings you...
·A quick, inexpensive solution for immediate energy savings and conservation
Longer machine lifespan
·Early ROI less than a two year payback
·Environmental benefits reduces GHG emissions by 2,615 lbs of CO2
·Compatibility with all types of cold drink vending machines
VendingMiser® uses a Passive Infrared Sensor to:
Power down the machine when the surrounding area is vacant
Monitor the room's temperature
Automatically repower the cooling system at one to three hour intervals, independent of sales
Ensure the product stays cold
This Miser runs the bank...
For a series of up to four machines, VendingMiser® can use its embedded Sensor Repeater, which allows it to be controlled from the PIR sensor of any other Miser in the bank.
Miserly savings...
Maintenance savings is generated through reduced running time of vendor components, estimated at $40 - $80 per year, per machine. Energy consumption is reduced an average of 46% - typically $130 to $190 per machine annual
VendingMiser® VM150 Indoor Wall Mount w/ PIR Occupancy Sensor is for Vending Machines located indoors
Parts Included:
1 VendingMiser Controller
1 Wall Mounting Plate
1 Indoor Occupancy Sensor w/ mounting bracket
Parts Included:
1 VendingMiser Controller
1 Wall Mounting Plate
1 Indoor Occupancy Sensor w/ mounting bracket
VendingMiser® VM151 with internal Sensor Repeater is for vending machines located indoors. Use as secondary unit with a VendingMiser VM150
Parts Included:
1 VendingMiser Controller
1 Wall Mounting Plate
1 10' Repeater Cable
Parts Included:
1 VendingMiser Controller
1 Wall Mounting Plate
1 10' Repeater Cable
VendingMiser VM160 with weatherproof PIR Occupancy Sensor and weatherproof controller housing. Wall-mounted for outdoor use. Use in locations where vending placements are not subject to change. Separate sensor assembly provides flexibility in placement to achieve best occupancy detection.
Parts Included:
1 VendingMiser Controller
1 Outdoor Wall Mounting Plate
1 Outdoor Occupancy Sensor
1 Weatherproof Enclosure with screws
Parts Included:
1 VendingMiser Controller
1 Outdoor Wall Mounting Plate
1 Outdoor Occupancy Sensor
1 Weatherproof Enclosure with screws
VendingMiser VM161 Controller with internal Sensor Repeater and weatherproof controller housing. Wall mount for outdoor use. Use as secondary unit to the VM160. Includes 10' data cable to connect to primary VendingMiser. Up to three VM161 units can be connected to a primary VendingMiser for a total of four units controlled by one sensor.
Parts Included:
1 VendingMiser Controller
1 Outdoor Wall Mounting Plate
1 10' Repeater Cable
1 Weatherproof Enclosure with screws
Parts Included:
1 VendingMiser Controller
1 Outdoor Wall Mounting Plate
1 10' Repeater Cable
1 Weatherproof Enclosure with screws
VendingMiser VM170 with PIR Occupancy Sensor. EZ Mount Z-Bracket for indoor use attaches directly to a vending machine with industrial strength Velcro. Installs quickly and allows VendingMiser to move with machine. Use in locations where machine placements are subject to change or if wall mounting is not desired.
Parts Included:
1 VM170 assembled and ready for installation
Parts Included:
1 VM170 assembled and ready for installation
VendingMiser VM171 Controller with internal Sensor Repeater for indoor use. Use as secondary unit with a VendingMiser VM170. Includes a 10' repeater cable to connect to a VM150 or VM170. Up to three VM171 secondary units can be connected to a primary VendingMiser for a total of four units controlled by one sensor.
Parts Included:
1 VM171 ready for installation
1 10' Repeater Cable
Parts Included:
1 VM171 ready for installation
1 10' Repeater Cable
VendingMiser VM180 with weatherproof PIR Occupancy Sensor and weatherproof controller housing. EZ Mount Z-Bracket for outdoor use attaches directly to a vending machine with industrial strength Velcro. Installs quickly and allows VendingMiser to move with machine. Use in outdoor locations where vending placements are subject to change or if wall mounting is not desired.
Parts Included:
1 VM180 ready for installation
Parts Included:
1 VM180 ready for installation
VendingMiser VM181 Controller with internal Sensor Repeater and weatherproof controller housing. For outdoor use. Use as secondary unit to the VM180. Includes a 10' repeater cable to connect to a primary VendingMiser. Up to three VM181 units can be connected to primary VendingMiser for a total of four units controlled by one sensor.
Parts Included:
1 CM181 ready for installation
1 10' Repeater Cable
Parts Included:
1 CM181 ready for installation
1 10' Repeater Cable
www.MWreduction.com
Copyright © 2009 MEGAwatt Reduction Inc.All rights reserved
